Datasheet
THS7360
SLOS674 –JUNE 2010
www.ti.com
ELECTRICAL CHARACTERISTICS: V
S+
= +3.3 V (continued)
At T
A
= +25°C, R
L
= 150 Ω to GND, Filter mode, and dc-coupled input/output, unless otherwise noted.
THS7360
TEST
PARAMETER TEST CONDITIONS MIN TYP MAX UNITS LEVEL
(1)
AC PERFORMANCE (SF
(3)
CHANNELS, SD FILTER)
Passband bandwidth –1 dB; V
O
= 0.2 V
PP
and 2 V
PP
6.6 8 9.6 MHz B
Small- and large-signal bandwidth –3 dB; V
O
= 0.2 V
PP
and 2 V
PP
7.8 9.2 11 MHz B
With respect to 500 kHz
(4)
, f = 6.75 MHz –0.8 0.4 1.3 dB B
Attenuation
With respect to 500 kHz
(4)
, f = 27 MHz 42 50 dB B
Group delay f = 100 kHz 62 ns C
Group delay variation f = 5.1 MHz with respect to 100 kHz 10.5 ns C
Channel-to-channel delay 0.3 ns C
Total harmonic distortion f = 1 MHz, V
O
= 1.4 V
PP
–57 dB C
100 kHz to 6.75 MHz, non-weighted 58 dB C
Signal-to-noise ratio
100 kHz to 6.75 MHz, unified weighting 69 dB C
Gain All channels 4.37 4.50 4.63 V/V A
Output impedance f = 6.75 MHz 0.7 Ω C
Return loss f = 6.75 MHz 46 dB C
f = 1 MHz, SF to SD channels, input referred –57 dB C
Crosstalk f = 1 MHz, SD to SF channels, input referred –56 dB C
f = 1 MHz, SF to SF channels, input referred –56 dB C
AC PERFORMANCE (SF CHANNELS, ED FILTER)
Passband bandwidth –1 dB; V
O
= 0.2 V
PP
and 2 V
PP
11 15 18.5 MHz B
Small- and large-signal bandwidth –3 dB; V
O
= 0.2 V
PP
and 2 V
PP
15 17 21 MHz B
With respect to 500 kHz
(4)
, f = 11 MHz –1 0.1 1 dB B
Attenuation
With respect to 500 kHz
(4)
, f = 54 MHz 42 54 dB B
Group delay f = 100 kHz 36 ns C
Group delay variation f = 11 MHz with respect to 100 kHz 9 ns C
Channel-to-channel delay 0.3 ns C
Total harmonic distortion f = 5 MHz, V
O
= 1.4 V
PP
–50 dB C
100 kHz to 12 MHz, non-weighted 57.5 dB C
Signal-to-noise ratio
Unified weighting 68 dB C
Gain All channels 4.37 4.5 4.63 V/V A
Output impedance f = 12 MHz 0.7 Ω C
Return loss f = 12 MHz 46 dB C
f = 10 MHz, SF to SD channels, input referred –46 dB C
Crosstalk f = 10 MHz, SD to SF channels, input referred –47 dB C
f = 10 MHz, SF to SF channels, input referred –36 dB C
(3) SF indicates selectable filter.
(4) 3.3-V supply filter specifications are ensured by 100% testing at 5-V supply along with design and characterization.
4 Submit Documentation Feedback Copyright © 2010, Texas Instruments Incorporated
Product Folder Link(s): THS7360