Datasheet

THS7347

www.ti.com

SLOS531B –MAY 2007– REVISED OCTOBER 2011

Table 4. THS7347 Channel Register (H/V Sync Channel + Analog Channels State) Bit Decoder Table.

Use in Conjunction With Register Bit Code (0000 0100)

BIT

BIT FUNCTION VALUE(S) RESULT

(MSB)

Reserved; Do not care X Reserved; do not care

0 Disables all monitor channels regardless of bits 2:0 of Register 1

Monitor Pass-Through Path Disable

through Register 3

6 Mode

1 Enables monitor channels functions dictated by each programmed

(Use in Conjunction with Table 3)

0 Disables all buffer channels regardless of bits 2:0 of Register 1

through Register 3

Buffer Path Disable Mode

(Use in Conjunction with Table 3)

1 Enables buffer channel functions dictated by each programmed

0 0 MUX Input A

0 1 MUX Input B

4, 3 Vertical Sync Channel MUX Selection

1 0 Reserved; do not care

1 1 Reserved; do not care

0 0 MUX Input A

0 1 MUX Input B

2, 1 Horizontal Sync Channel MUX Selection

1 0 Reserved; do not care

1 1 Reserved; do not care

0 Disable H-Sync and V-Sync Channels

H/V Sync Paths Disable Mode

(LSB)

1 Enable H-Sync and V-Sync Channels

Bit (MSB) 7: Reserved; do not care.

Bit 6: Master Monitor Path Disable. Disables all monitor channels regardless of what is programmed into

each register channel (1 to 3).

Bit 5: Master Buffer Path Disable. Disables all buffer channels regardless of what is programmed into each

Bits 4, 3: Selects the Input MUX channel for the Vertical Sync.

Bits 2, 1: Selects the Input MUX channel for the Horizontal Sync.

Bit 0 (LSB): Enables or disables the H-Sync and V-Sync Channels.