Datasheet

V
IN+
V
IN-
+12V
33nF
10.2W
THS6226
1:1.4
100kW
+12V
CLK
DATA
1 Fm
1 Fm
OUTD
OUTC
IND
INC
VLL_CD
VHH_CD
CAPL_CD
CAPH_CD
FBC
FBD
Line:
100W
THS6226
SBOS499C –JANUARY 2011–REVISED APRIL 2011 www.ti.com
APPLICATION INFORMATION
The THS6226 class H line driver provides exceptional ac performance in conjunction with wide output voltage
swing. The class H operation allows voltage swings to exceed the power supply for short intervals limited only by
the charge in the capacitor. In class AB mode, the THS6226 is capable of driving a 60Ω load from +1.9V to
+10.1V. In class H mode, under the same conditions, the output voltage range becomes an impressive –5.5V to
+17.5V, or 46V
PP
differentially with the capacitor fully charged.
Figure 20 shows a fully-differential, noninverting amplifier configuration with active impedance. In this
configuration, the 10.2Ω matching resistance appears through the transformer as 100Ω, minimizing reflection on
the line, while also minimizing transmission losses. The THS6226 gain is fixed and equal to 19V/V from input of
the amplifier to the output of the amplifier (IN
CD
to OUT
CD
), not including the transformer-turn ratio.
To simplify the implementation as well as provide design flexibility, the THS6226 contains an integrated
mid-supply buffer that provides the correct biasing to the amplifier core without requiring any external
components. Also present is a two-pin serial interface that provides exceptional design flexibility and allows
minimal power consumption for each xDSL profile.
Figure 20. Multi-Tone Power Ratio (MTPR) Test Circuit
10 Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated
Product Folder Link(s): THS6226