Datasheet

Tracking Layer
DGND/AGND
DV
DD
/AV
DD
Tracking Layer
Layer 1
Layer 2
Layer 3
Layer 4
Component Side
Solder Side
Physical Description www.ti.com
2.1 Physical Description
The PWB is constructed in four layers as shown in the following illustrations. The dimensions of the PWB
are 4.25 in × 3.375 in (107.95 mm × 85.73 mm). See Figure 2-1.
Figure 2-1. PWB Layers
Figure 2-2 through Figure 2-5 show the tracking for each layer.
Figure 2-2. Board Layout, Layer 1
18
Getting Started SLAU032C– February 2001– Revised April 2011
Submit Documentation Feedback
Copyright © 2001–2011, Texas Instruments Incorporated