Datasheet

www.ti.com
RECOMMENDED OPERATING CONDITIONS
(1)
PACKAGE DISSIPATION RATINGS
THS4303
SLOS421B – NOVEMBER 2003 – REVISED JANUARY 2005
MIN MAX UNIT
Dual supply ± 1.5 ± 2.5
Supply voltage, (VS+ and VS–) V
Single supply 3 5
Input common-mode voltage range V
S–
+1 V
S+
–1 V
(1) This data was taken using 2 oz. trace and copper pad that is soldered directly to a 3 in. x 3 in. PCB. For further information, refer to
Application Information section of this data sheet.
POWER RATING
(1)
PACKAGE Θ
JC
( ° C/W) Θ
JA
( ° C/W)
T
A
≤ 25 ° C T
A
=85 ° C
RGT-16
(2)
2.4 39.5 2.53 W 1.01 W
(1) Power rating is determined with a junction temperature of 125 ° C. This is the point where distortion
starts to substantially increase. Thermal management of the final PCB should strive to keep the
junction temperature at or below 125 ° C for best performance and long term reliability.
(2) This data was taken using 2 oz. trace and copper pad that is soldered directly to a 3 in. x 3 in. PCB.
For further information, refer to Application Information section of this data sheet.
AVAILABLE OPTIONS
PACKAGED DEVICES
(1)
T
A
LEADLESS
GAIN RGT-16
THS4303RGTR
–40 ° C to 85 ° C +10
THS4303RGTT
(1) Packages are available taped and reeled. The R suffix standard quantity is 3000. The T suffix
standard quantity is 250.
INTERNAL FIXED RESISTOR VALUES
DEVICE GAIN (V/V) R
f
R
g
THS4303 +10 450 50
3