Datasheet

2-1

Using the THS4226EVM

This chapter shows how to connect the THS4226EVM to test equipment. It is

recommended that the user connect the EVM as shown in this chapter to avoid

damage to the EVM or the THS4226 installed on the board. Figure 2-1 shows

how to connect the power supplies, 50-Ω signal source and 50-Ω monitoring

instrument.

Figure 2-1. THS4226EVM Connection Diagram

Figure 2-1 shows the connections to measure output 1 while a signal is

inserted into the channel 1, noninverting input of the EVM. If the oscilloscope

input is connected to J1, and the signal source is connected to J2, EVM

channel 2 is also configured for a noninverting signal path.

Chapter 2