Datasheet

THS4082 EVM Noninverting Operation
1-4
General
1.3 THS4082 EVM Noninverting Operation
The THS4082 EVM is shipped preconfigured for dual-channel noninverting
operation, as shown in Figure 1–2.
Note:
Compensation capacitors C3 and C6 are not installed.
Figure 1–2. THS4082 EVM Schematic: Noninverting Operation
C1
6.8 µF
–VCC
1
GND
2
+VCC
3
J2
C2
6.8 µF
–VCC
+VCC
–
+
U1:A
THS4082
1
4
8
2
3
R3
0 Ω
R5
1 kΩ
R6
1 kΩ
+VCC
C3
x µF
R7
49.9 Ω
VOUT1
J3
C4
0.1 µF
–VCC
J1
VIN1
R1
49.9 Ω
–
+
U1:B
THS4082
7
6
5
R11
0 Ω
R13
1 kΩ
R14
1 kΩ
C6
x µF
R15
49.9 Ω
VOUT2
J5
J4
VIN2
R9
49.9 Ω
C5
0.1 µF
The gain of the EVM can easily be changed to support a particular application
by simply changing the ratio of resistors R6 and R5 (channel 1) and R14 and
R13 (channel 2) as described in the following equation:
Noninverting Gain  1 
R
F
R
G
 1 
R6
R5
and 1 
R14
R13
In addition, some applications, such as those for video, may require the use
of a 75-Ω cable and 75-Ω EVM input termination and output isolation resistors.