Datasheet

Additional Reference Material
THS3201-EP
SGLS283B – APRIL 2005 – REVISED JANUARY 2009 ..................................................................................................................................................... www.ti.com
Table 2. Bill of Materials
(1)
THS3201DGN EVM
PCB
ITEM DESCRIPTION SMD SIZE REF DES MANUFACTURER PART NUMBER
QUANTITY
1 Bead, ferrite, 3 A, 80 Ω 1206 FB1, FB2 2 (Steward) HI1206N800R-00
2 Cap, 22 F, tanatalum, 25 V, 10% D C1, C2 2 (AVX) TAJD226K025R
3 Cap, 100 pF, ceramic, 5%, 150 V AQ12 C4, C5 2 (AVX) AQ12EM101JAJME
4 Cap, 0.1 F, ceramic, X7R, 50 V 0805 C3, C6 2 (AVX) 08055C104KAT2A
6 Open 0805 R7 1
7 Resistor, 49.9 Ω , 1/8 W, 1% 0805 R6 1 (Phycomp) 9C08052A49R9FKHFT
9 Resistor, 768 Ω , 1/8 W, 1% 0805 R3, R5 2 (Phycomp) 9C08052A7680FKHFT
10 Open 1206 C7, C8 2
11 Resistor, 0 Ω , 1/4 W, 1% 1206 R2 1 (KOA) RK73Z2BLTD
12 Resistor, 49.9 Ω , 1/4 W, 1% 1206 R4 1 (Phycomp) 9C12063A49R9FKRFT
13 Test point, black TP1 1 (Keystone) 5001
14 Open J8, J9 2
Jack, Banana Receptance, 0.25 ” dia. J5, J6, J7 3 (HH Smith) 101
15
hole
16 Connector, edge, SMA PCB jack J1, J2, J4 3 (Johnson) 142-0701-801
17 Standoff, 4-40 hex, 0.625 ” length 4 (Keystone) 1804
18 Screw, Phillips, 4-40, .250 ” 4 SHR-0440-016-SN
19 IC, THS3201 U1 1 (Texas Instruments) THS3201DGN
20 Board, printed circuit 1 (Texas Instruments) Edge # 6447972 Rev.A
(1) The components shown in the BOM were used in test by TI.
Computer simulation of circuit performance using
SPICE is often useful when analyzing the
performance of analog circuits and systems. This is
• PowerPAD™ Made Easy, application brief
particularly true for video and R
F
-amplifier circuits,
(SLMA004)
where parasitic capacitance and inductance can have
• PowerPAD™ Thermally-Enhanced Package,
a major effect on circuit performance. A SPICE model
technical brief (SLMA002)
for the THS4500 family of devices is available
• Voltage Feedback vs Current Feedback Amplifiers
through the TI web site (www.ti.com ). The Product
(SLVA051)
Information Center (PIC) is available for design
assistance and detailed product information. These
• Current Feedback Analysis and Compensation
models do a good job of predicting small-signal ac
(SLOA021)
and transient performance under a wide variety of
• Current Feedback Amplifiers: Review, Stability,
operating conditions. They are not intended to model
and Application (SBOA081)
the distortion characteristics of the amplifier, nor do
• Effect of Parasitic Capacitance in Op Amp Circuits
they attempt to distinguish between the package
(SLOA013)
types in their small-signal ac performance. Detailed
information about what is and is not modeled is
contained in the model file itself.
26 Submit Documentation Feedback Copyright © 2005 – 2009, Texas Instruments Incorporated
Product Folder Link(s): THS3201-EP