Datasheet

2-1

Using the THS3062EVM

This chapter shows how to connect the THS3062EVM to test equipment. It is

recommended that the user connect the EVM as described in this chapter to

avoid damage to the EVM or the THS3062 installed on the board. Figure 2.1

shows how to connect power supplies, a 50-Ω signal source, and a 50-Ω

monitoring instrument.

Figure 2-1. THS3062EVM Interconnection Diagram

Figure 2-1 shows the connections to measure the output of output 1 while a

signal is inserted into EVM channel 1’s noninverting input. The signal source

can instead be connected to J2 for an inverting signal path. If the oscilloscope

input is connected to J6 and the signal source is connected to J5, EVM channel

2 is also configured for a noninverting signal path.

Chapter 2