Datasheet

TFP410-EP
PanelBus™ DIGITAL TRANSMITTER
SGLS344A − JULY 2006 − REVISED MAY 2011
6
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
absolute maximum ratings over operating free-air temperature (unless otherwise noted)
†
Supply voltage range, DV
DD
, PV
DD
, TV
DD
−0.5 V to 4 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input voltage, logic/analog signals −0.5 V to 4 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
External DVI single-ended termination resistance, R
T
0 Ω to open circuit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
External TFADJ resistance, R
TFADJ
300 Ω to open circuit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range
‡
, T
stg
–65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Case temperature for 10 s 260°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lead temperature 1,6 mm (1/16 in) from case for 10 s 260°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ESD protection: DVI pins 4 kV, Human-Body Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
All other pins 2 kV, Human-Body Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
JEDEC latch up (EIA/JESD78) 100 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
‡
Long-term high-temperature storage and/or extended use at maximum recommended operating conditions may result in a reduction of overall
device life. See http://www.ti.com/ep_quality for additional information on enhanced plastic packaging.
dissipation ratings
PACKAGE
AIR FLOW
(cfm)
T
A
3 255C
POWER RATING
DERATING FACTOR
ABOVE T
A
= 255C
T
A
= 705C
POWER RATING
T
A
= 855C
POWER RATING
T
A
= 1255C
POWER RATING
PAP 0 2.962 W 23.7 mW/°C 1.895 W 1.54 W 592 mW
NOTE: See Table 2 for the thermal properties of the 64-pin TQFP PowerPAD package.
recommended operating conditions
MIN NOM MAX UNIT
Supply voltage, V
DD
(DV
DD
, PV
DD
, TV
DD
) 3 3.3 3.6 V
Input reference voltage V
Low-swing mode 0.55 V
DDQ
/2
§
0.9
V
Input reference voltage, V
REF
High-swing mode DV
DD
V
DVI termination supply voltage, AV
DD
(see Note 1) DVI receiver 3.14 3.3 3.46 V
DVI Single-ended termination resistance, R
T
(see Note 2) DVI receiver 45 50 55 Ω
TFADJ resistor for DVI-compliant V
(SWING)
, R
(TFADJ)
400 mV = V
(SWING)
= 600 mV 505 510 515 Ω
Operating free-air temperature, T
A
−55 25 125 °C
§
V
DDQ
defines the maximum low-level input voltage, it is not an actual input voltage.
NOTES: 1. AV
DD
is the termination supply voltage of the DVI link.
2. R
T
is the single-ended termination resistance at the receiver end of the DVI link.