Datasheet
PanelBus
SLDS119C - MARCH 2000 − REVISED OCTOBER 2003
6
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
recommended operating conditions
MIN TYP MAX UNIT
Supply voltage, V
DD
(DV
DD
, AV
DD
, PV
DD
, OV
DD
) 3 3.3 3.6 V
Pixel time, t
pix
†
11.6 40 ns
Single ended analog input termination resistance, R
t
45 50 55 Ω
Operating free-air temperature, T
A
0 25 70 °C
†
t
pix
is the pixel time defined as the period of the RxC clock input. The period of the output clock, ODCK is equal to t
pix
when in 1-pixel/clock mode
and 2t
pix
when in 2-pixel/clock mode.
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
dc digital I/O specifications
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
V
IH
High level digital input voltage
‡
2 DV
DD
V
V
IL
Low level digital input voltage
‡
0 0.8 V
I
OH
High level output drive current
§
ST = High, V
OH
= 2.4 V 5 10 14
mA
I
OH
High level output drive current
§
ST = Low, V
OH
= 2.4 V 3 6 9
mA
I
OL
Low level output drive current
§
ST = High, V
OL
= 0.8 V 10 13 19
mA
I
OL
Low level output drive current
§
ST = Low, V
OL
= 0.8 V 5 7 11
mA
I
OZ
Hi-Z output leakage current PD = Low or PDO = Low -1 1 µA
‡
Digital inputs are labeled DI in I/O column of Terminal Functions Table.
§
Digital outputs are labeled DO in I/O column of Terminal Functions Table.
dc specifications
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
V
ID
Analog input differential voltage (see Note 3) 75 1200 mv
V
IC
Analog input common mode voltage (see Note 3) AV
DD
-300 AV
DD
-37 mv
V
I(OC)
Open circuit analog input voltage AV
DD
-10 AV
DD
+10 mv
I
DD(2PIX)
Normal 2-pix/clock power supply current (see Note 4)
ODCK = 43 MHz
2-pix/clock
350 mA
I
PD
Power down current (see Note 5) PD = Low 10 mA
I
PDO
Output drive power down current (see Note 5) PDO = Low 35 mA
NOTES: 3. Specified as dc characteristic with no overshoot or undershoot.
4. Alternating 2-pixel black/2-pixel white pattern. ST = high, STAG
= high, QE[23:0] and QO[23:0] C
L
= 10 pF.
5. Analog inputs are open circuit (transmitter is disconnected from TFP101/101A).
Not Recommended for New Designs