Datasheet

Launchpad Software Setup

www.ti.com

7 Launchpad Software Setup

Use the following steps to set up the Launchpad software:

1. Download Code Composer Studio from the Texas Instruments link.

2. With the Launchpad unplugged, configure the headers on the Launchpad to match the yellow box in

the image below:

• The right 3 headers are vertical and the left 2 are horizontal

3. With the Launchpad still unplugged, remove the right-most jumper on the J5 header to match the

yellow box below:

TCA8424 Evaluation Module SCDU004–March 2013

Submit Documentation Feedback