Datasheet

www.ti.com
ABSOLUTE MAXIMUM RATINGS
RECOMMENDED OPERATING CONDITIONS
ELECTRICAL CHARACTERISTICS
TB5T1
SLLS589C – NOVEMBER 2003 – REVISED OCTOBER 2007
over operating free-air temperature range unless otherwise noted
(1)
UNIT
Supply voltage, V
CC
0 V to 6 V
Magnitude of differential bus (input) voltage, |V
RI1
- V
RI1
|, |V
RI2
- V
RI2
| 8.4 V
Human Body Model
(2)
All pins ± 3 kV
ESD
Charged-Device Model
(3)
All pins ± 2 kV
Continuous power dissipation See Dissipation Rating Table
Storage temperature, T
stg
-65 ° C to 150 ° C
(1) Stresses beyond those listed under "absolute maximum ratings ” may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions ” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) Tested in accordance with JEDEC Standard 22, Test Method A114-A.
(3) Tested in accordance with JEDEC Standard 22, Test Method C101.
MIN NOM MAX UNIT
Supply voltage, V
CC
4.5 5 5.5 V
Bus pin input voltage, V
RI1
, V
RI1
, V
RI2
, or V
RI2
-1.2
(1)
7.2 V
Magnitude of differential input voltage, |V
RI1
- V
RI1
|, |V
RI2
- V
RI2
| 0.1 6 V
Operating free-air temperature, T
A
-40 85 ° C
(1) The algebraic convention, in which the least positive (most negative) limit is designated as minimum is used in this data sheet, unless
otherwise noted.
over operating free-air temperature range unless otherwise noted
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Outputs disabled 40 mA
I
CC
Supply current
Outputs enabled 40 mA
Copyright © 2003 – 2007, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Link(s): TB5T1