Datasheet
TAS5717
TAS5719
www.ti.com
SLOS655A –NOVEMBER 2010–REVISED FEBRUARY 2011
Table 3. Serial Control Interface Register Summary (continued)
NO. OF INITIALIZATION
SUBADDRESS REGISTER NAME CONTENTS
BYTES VALUE
0x5C ch2_bq[10] 20 u[31:26], b0[25:0] 0x0080 0000
u[31:26], b1[25:0] 0x0000 0000
u[31:26], b2[25:0] 0x0000 0000
u[31:26], a1[25:0] 0x0000 0000
u[31:26], a2[25:0] 0x0000 0000
0x5D ch2_bq[11] 20 u[31:26], b0[25:0] 0x0080 0000
u[31:26], b1[25:0] 0x0000 0000
u[31:26], b2[25:0] 0x0000 0000
u[31:26], a1[25:0] 0x0000 0000
u[31:26], a2[25:0] 0x0000 0000
0x5E ch3_bq[0] 20 u[31:26], b0[25:0] 0x0080 0000
u[31:26], b1[25:0] 0x0000 0000
u[31:26], b2[25:0] 0x0000 0000
u[31:26], a1[25:0] 0x0000 0000
u[31:26], a2[25:0] 0x0000 0000
0x5F ch3_bq[1] 20 u[31:26], b0[25:0] 0x0080 0000
u[31:26], b1[25:0] 0x0000 0000
u[31:26], b2[25:0] 0x0000 0000
u[31:26], a1[25:0] 0x0000 0000
u[31:26], a2[25:0] 0x0000 0000
0x60–0x61 4 Reserved
(4)
0x62 IDF post scale 4 0x0000 0080
0x63–0x6A Reserved
(4)
0x6B Left channel PWM level meter 4 Data[31:0] 0x0000 0000
0x6C Right channel PWM level meter 4 Data[31:0] 0x0000 0000
0x6D–0x6F Reserved
(4)
0x70 ch1 inline mixer 4 u[31:26], in_mix1[25:0] 0x0080 0000
0x71 inline_DRC_en_mixer_ch1 4 u[31:26], in_mixdrc_1[25:0] 0x0000 0000
0x72 ch1 right_channel mixer 4 u[31:26], right_mix1[25:0] 0x0000 0000
0x73 ch1 left_channel_mixer 4 u[31:26], left_mix_1[25:0] 0x0080 0000
0x74 ch2 inline mixer 4 u[31:26], in_mix2[25:0] 0x0080 0000
0x75 inline_DRC_en_mixer_ch2 4 u[31:26], in_mixdrc_2[25:0] 0x0000 0000
0x76 ch2 left_chanel mixer 4 u[31:26], left_mix1[25:0] 0x0000 0000
0x77 ch2 right_channel_mixer 4 u[31:26], right_mix_1[25:0] 0x0080 0000
0x78–0xF7 Reserved
(4)
0xF8 Update dev address key 4 Dev Id Update Key[31:0] (Key = 0x0000 0000
0xF9A5A5A5)
0xF9 Update dev address reg 4 u[31:8],New Dev Id[7:0] (New Dev Id = 0x38 0x0000 0054
for TAS5717/9)
0xFA–0xFF 4 Reserved
(4)
(4) Reserved registers should not be accessed.
All DAP coefficients are 3.23 format unless specified otherwise.
Registers 0x3B through 0x46 should be altered only during the initialization phase.
© 2010–2011, Texas Instruments Incorporated Submit Documentation Feedback 37
Product Folder Link(s): TAS5717 TAS5719