Datasheet

www.ti.com

Using the EVM Software

Figure 11. Filter Creation Tool Window

A check mark selects the Biquad. If not selected, the Biquad is in ALL PASS Mode.

The frequency response for the current settings can be viewed and adjusted in Frequency Response

Window Tab (Figure 11). The individual Biquad gains must be within ±12db.

Apply from the filter data window sends all the three banks of coefficients (providing auto bank is

enabled).

3.5 DRC GUI

The TAS5713 supports 1-band and 2-band DRC. Select the drc mode from properties window. Then set

the DRC threshold by opening the drc gui and adjusting the sliders as shown in Figure 12.

Figure 12. DRC Options

SLOU281–January 2010 25W Digital Input Amplifier With EQ and 2-Band DRC

Submit Documentation Feedback