Datasheet

3.5 DRC GUI
www.ti.com Using the EVM Software
Figure 11. Filter Creation Tool Window
A check-mark selects the Biquad. If not selected, the Biquad is in ALL PASS Mode.
Frequency response for the current settings can be viewed and adjusted in Frequency Response
Window Tab (Figure 11 ). Individual Biquad Gains must be within ± 12 db.
The command Apply from the filter data window sends all three banks of coefficients (providing auto bank
is enabled).
Clicking on the function selects DRC GUI (Figure 12 ). Click on the DRC function, and check to see if DRC
is enabled in the property window.
Figure 12. DRC Parameters
SLOU232A – January 2009 – Revised January 2009 TAS5708(TAS5710)EVM 11
Submit Documentation Feedback