Datasheet

+50 V
(J15)
LEFT BTL
SPEAKER
OUTPUT
(J11)
RIGHT BTL
SPEAKER
OUTPUT
(J13)
(SW1)
(SW2)
PBTL
PBTLBTL
BTL
INPUT SIGNAL& CONTROL
INTERFACE (J10)
TAS5518
OUTPUT STAGE
CHANNEL RIGHT
PBLT
OUTPUT STAGE
CHANNEL LEFT
www.ti.com Quick Setup Guide
Figure 3. PBTL Mode Configuration
2.6 GUI Software Installation
The TAS5518 GUI provides control of all registers in the TAS5518. To install the GUI, download the GUI
setup file and the configuration file "TAS5631PHD2EVM Configuration (1.00).cfg" from the
TAS5631PHD2EVM folder on www.ti.com.
After installation turn on power supplies and connect the USB cable to the Input-USB board 2.
Start the GUI program from windows menu. Start up of the GUI will take a few seconds.
7
SLOU275A–December 2009–Revised May 2010 TAS5631PHD2EVM
Copyright © 2009–2010, Texas Instruments Incorporated