Datasheet

www.ti.com TAS5630PHD2EVM Performance
Table 6. Audio Performance
Audio Performance Notes/Conditions
THD+N, BTL, 4 Ω: 1 W <0.05 % 1 kHz
THD+N, BTL, 4 Ω: 10 W <0.09 % 1 kHz
THD+N, BTL, 4 Ω: 50 W <0.05 % 1 kHz
THD+N, BTL, 4 Ω: 100 W <0.4 % 1 kHz
THD+N, BTL, 4 Ω: 200 W <0.05 % 1 kHz
THD+N, BTL, 8 Ω: 1 W <0.09 % 1 kHz
THD+N, BTL, 8 Ω: 10 W <0.05 % 1 kHz
THD+N, BTL, 8 Ω: 50 W <0.05 % 1 kHz
THD+N, BTL, 8 Ω: 100 W <0.05 % 1 kHz
THD+N, PBTL, 2 Ω: 1 W <0.09 % 1 kHz
THD+N, PBTL, 2 Ω: 10 W <0.05 % 1 kHz
THD+N, PBTL, 2 Ω: 100 W <0.05 % 1 kHz
THD+N, PBTL, 2 Ω: 200 W <0.09 % 1 kHz
THD+N, PBTL, 2 Ω: 300 W <0.09 % 1 kHz
THD+N, PBTL, 2 Ω: 400 W <0.04 % 1 kHz
Dynamic Range: >102 dB Ref: rated power, A-weighted, AES17 filter, 2 ch avg
Noise Voltage: 280 mVrms A-weighted, AES17 filter
Channel Separation: >84 dB 1 kHz,
Frequency Response: +0.5 / –0.6 dB 90 W / 4 Ω, unclipped (1% THD+N)
Table 7. Thermal Specification
Thermal Specification** T
HEATSINK
* Notes/Conditions
Idle, all channels switching 30°C 1 kHz, 15 min, input grounded, T
A
= 25°C
2 x 37.5 W, 4 Ω (1/8 power) 40°C 1 kHz, 1 hour, T
A
= 25°C
2 x 300 W, 4 Ω 85°C 1 kHz, 5 min, T
A
= 25°C
*Measured on surface of heatsink
** During the thermal test the heat sink has been ventilated with a fan (NMB-MAT Type: 2410ML-04W-B50) connected to J22.
Table 8. Physical Specifications
Physical Specifications Notes/Conditions
PCB dimensions: 90 × 140 × 55 Width × Length × Height (mm)
Total weight: 400 gr Components + PCB + Heatsink + Mechanics
Note: All electrical and audio specifications are typical values.
9
SLAU287A–December 2009–Revised May 2010 TAS5630PHD2EVM
Copyright © 2009–2010, Texas Instruments Incorporated