Datasheet

TAS5630B
SLES217C –NOVEMBER 2010–REVISED SEPTEMBER 2012 www.ti.com
REVISION HISTORY
Changes from Original (November 2010) to Revision A Page
• Changed Title From: 600-W MONO To 400-W MONO ........................................................................................................ 1
• Changed Feature From: 600 W per Channel in Mono PBTL Configuration To: 400 W per Channel in Mono PBTL
Configuration ......................................................................................................................................................................... 1
• Changed the Pin One Location Package image ................................................................................................................... 2
• Replaced the PACKAGE HEAT DISSIPATION RATINGS table with the THERMAL INFORMATION table ....................... 3
• Changed R
L
(PBTL) Load Impedance Min value From: 1.6 Ω To: 2.4 Ω, and Typ value From 2 To: 3 Ω ............................ 4
• Added footnotes
(1)
and
(2)
to the ROC table ........................................................................................................................ 4
• Added R
OCP
information to the ROC Table ........................................................................................................................... 4
• Deleted - R
L
= 2 Ω, 10%, THD+N, clipped input signal From P
O
in the Audio Specification (PBTL) table ........................ 10
• Changed the I
OC
Typical Value From: 19 A To: 15 A ......................................................................................................... 11
• Replaced the TYPICAL CHARACTERISTICS, PBTL CONFIGURATION graphs ............................................................. 15
• Added section - Click and Pop in SE-Mode ....................................................................................................................... 25
• Added section - PBTL Overload and Short Circuit ............................................................................................................. 25
(1) See additional details for SE and PBTL in the System Design Considerations section.
(2) Values are for actual measured impedance over all combinations of tolerance, current and temperature and not simply the component
rating.
Changes from Revision A (November 2011) to Revision B Page
• Changed the R
INT_PU
parameters From: OTW1 to VREG, OTW2 to VREG, SD to VREG To: OTW, OTW1, OTW2,
CLIP, READY, SD to VRE .................................................................................................................................................. 11
• Added text to the PHD Package section. ........................................................................................................................... 24
• Added text to the DKD Package section ............................................................................................................................ 24
Changes from Revision B (November 2011) to Revision C Page
• Deleted - R
L
= 2 Ω, 1% THD+N, unclipped output signal From P
O
in the Audio Specification (PBTL) table ..................... 10
• Changed Analog comparator reference node, VI_CM Vlaues From: MIN = 1.5 TYP = 1.75 MAX = 1.9 To: MIN =
1.75 TYP = 2 MAX = 2.15 ................................................................................................................................................... 10
• Changed ANALOG INPUTS - V
IN
TYP value From 3.5 to 5 V
PP
........................................................................................ 10
• Changed the V
IH
and V
IL
Test Conditions From: INPUT_X, M1, M2, M3, RESET To: M1, M2, M3, RESET .................... 11
28 Submit Documentation Feedback Copyright © 2010–2012, Texas Instruments Incorporated
Product Folder Links: TAS5630B