Datasheet

Headphones

3.5-mm Plug

USB Micro-

Controller

EVM Setup and Software Installation

www.ti.com

2 EVM Setup and Software Installation

This section describes the EVM setup and software installation.

2.1 EVM Setup

Figure 3. General Connection Picture

The following are the basic hardware for the initial EVM power up:

• Desktop or laptop PC running either Windows

XP or Windows 7

• Headphones set with 3.5-mm plug

• USB micro type B cable

When the USB cable is plugged in from the PC to the EVM, 3.3-V LED (green) and USB Lock LED (blue)

are illuminated. These indicators show that the EVM is working correctly.

TAS5548-5558EVM SLOU351–October 2012

Submit Documentation Feedback