Datasheet

User's Guide

SLOU345–June 2012

TAS5514B Evaluation Module (EVM) User's Guide

The TAS5514B evaluation module (EVM) is intended to be used to demonstrate the capabilities of the

device. All the device features can be accessed through the hardware supplied. This user’s guide contains

a description of the EVM. Included are the EVM schematics, bill of materials, and the board layout.

1 Quick-Start Guide

This section provides a guide to set up and power up the EVM without the details of its operation. For a

more-detailed description, read the complete user's guide.

1.1 Overview

The EVM consists of a single printed circuit board (PCB) mounted inside a metal chassis for EMC testing

and a power/speaker cable connector assembly. The EVM is different than the TAS5414B EVM as it does

not need an I

C controller board to function.

1.2 Connections

The connections are for an analog signal for the input, speaker loads, and power. The audio inputs are

made through the four RCA connectors. The power connections and speaker connections are made using

the 10-pin connector.

The basic connections are: PVDD or power is connected to the EVM through the supplied 10-pin

connector with the twisted red and black wires. The speakers or loads are also connected through the

same 10-pin connector with the twisted red and white wires. See Figure 1for EVM input details.

Figure 1. Connections for Input, Speaker Loads, and Power

TAS5514B Evaluation Module (EVM) User's Guide SLOU345–June 2012

Submit Documentation Feedback