Datasheet

TI A820-PCBSPEC-001(2.00)
Jonas Holm
Page 1 of 1
TAS5342DDV6EVM (A820)
PCB SPECIFICATION
Version 2.00
BOARD IDENTIFICATION: A820-PCB-001(2.00)
BOARD TYPE: DOUBLE-SIDED PLATED-THROUGH BOARD
LAMINATE TYPE: FR4
LAMINATE THICKNESS: 1.6 mm
COPPER THICKNESS: 70 μm (INCL. PLATING EXTERIOR LAYER)
COPPER PLATING OF HOLES: >25 μm
MINIMUM HOLE DIAMETER 0.3 mm
SILKSCREEN COMPONENT SIDE: WHITE - REMOVE SILKSCREEN FROM SOLDER AREA & PRE-TINNED AREAS
SILKSCREEN SOLDER SIDE: None
SOLDER MASK COMPONENT SIDE: GREEN
SOLDER MASK SOLDER SIDE: GREEN
PROTECTIVE COATING: SOLDER COATING AND CHEMICAL SILVER ON FREE COPPER
ELECTRICAL TEST: PCB MUST BE ELECTRICAL TESTED
MANUFACTURED TO: PERFAG 2E (www.perfag.dk)
APERTURE TABLE: PERFAG 10A (www.perfag.dk)
BOARD SIZE: 114 x 149 mm
COMMENTS: SEE DRILL INFORMATION FILE (PCBDOC.ZIP).