Datasheet

www.ti.com
Appendix A
Table A-1. Bill of Materials (continued)
Qty Ref Description Manufacture First Mfr P/N
1 PCB610 A819-PCB-001_2.00 / TAS5176DDW6EVM Printline A819-PCB-001(2.00)
Printed Circuit Board (ver. 2.00)
Table A-2. PCB Specification
Board identification A819-PCB-001(2.00)
Board type: Double-sided plated-through board
Laminate type FR4
Laminate thickness 1.6mm
Copper thickness 70 μ m (incl. plating exterior layer)
Copper plating of holes >25 μ m
Minimum hole diameter 0.3 mm
Silkscreen component side White - remove silkscreen from solder area and pre-tinned areas
Silkscreen solder side None
Solder mask component side Green
Solder mask solder side Green
Protective coating Solder coating and chemical silver on free copper
Electrical test PCB Must be electrical tested
Manufactured to PERFAG 2E (www.perfag.dk)
Aperture table PERFAG 10A (www.perfag.dk)
Board size 88 x 147.5 mm
Comments See drill information file (5210pcb.pdf)
Design Documents24 SLOU209A – September 2007 – Revised October 2007
Submit Documentation Feedback