Datasheet

www.ti.com
TAS5162DDV6EVM Performance
Table 7. Audio Performance
Audio Performance Notes/Conditions
THD+N, SE, 4 Ω : 1 W <0.09% 1 kHz
THD+N, SE, 4 Ω : 10 W <0.09% 1 kHz
THD+N, SE, 4 Ω : 50 W <0.08% 1 kHz
THD+N, BTL, 6 Ω : 1 W <0.009% 1 kHz
THD+N, BTL, 6 Ω : 10 W <0.05% 1 kHz
THD+N, BTL, 6 Ω : 50 W <0.03% 1 kHz
THD+N, BTL, 6 Ω : 100 W <0.12% 1 kHz
THD+N, BTL, 6 Ω : 150 W <0.14% 1 kHz
THD+N, BTL, 8 Ω : 1 W <0.007% 1 kHz
THD+N, BTL, 8 Ω : 10 W <0.04% 1 kHz
THD+N, BTL, 8 Ω : 50 W <0.03% 1 kHz
THD+N, BTL, 8 Ω : 100 W <0.08% 1 kHz
Dynamic Range: Ref: Rated Power, A-Weighted, AES17 Filter, 4 Ch
>109 dB
Avg
Noise Voltage SE: <50 μ Vrms A-weighted, AES17 Filter
Noise Voltage BTL: <100 μ Vrms A-weighted, AES17 Filter
Channel Separation: >68 dB 1 kHz
Frequency Response SE (100 Hz–20 kHz): ± 0.5 / –1.0 dB 62.5 W / 4 Ω , Unclipped (0 dBFS)
Frequency Response BTL (20 Hz–20 kHz): ± 0.3 125 W / 8 Ω , Unclipped (0 dBFS)
Table 8. Thermal Specifications
Thermal Specifications T
HEATSINK
(1)
Notes/Conditions
Idle, All Channels Switching 46 ° C 1 kHz, 15 min, –60-dBFS signal, T
A
= 25 ° C
4 x 7.5 W, 4 Ω + 2 × 16 W , 8 Ω (1/8 power) 66 ° C 1 kHz, 1 hour, T
A
= 25 ° C
2 x 60 W, 4 Ω 73 ° C 1 kHz, 5 min, T
A
= 25 ° C
(1)
Measured on surface of heatsink.
Table 9. Physical Specifications
(1)
Physical Specification Notes/Conditions
PCB Dimensions: 112 x 154 x 54 Width x Length x Height (mm)
Total Weight: 350 g Components + PCB + Heat-Sink + Mechanics
(1)
All electrical and audio specifications are typical values.
10 TAS5162DDV6EVM SLAU230A – September 2007 – Revised October 2007
Submit Documentation Feedback