Datasheet


SLES127A − FEBRUARY 2005 − REVISED NOVEMBER 2005
www.ti.com
3
Absolute Maximum Ratings
over operating free-air temperature range unless otherwise noted
(1)
TAS5152
VDD to AGND –0.3 V to 13.2 V
GVDD_X to AGND –0.3 V to 13.2 V
PVDD_X to GND_X
(2)
–0.3 V to 50 V
OUT_X to GND_X
(2)
–0.3 V to 50 V
BST_X to GND_X
(2)
–0.3 V to 63.2 V
VREG to AGND –0.3 V to 4.2 V
GND_X to GND –0.3 V to 0.3 V
GND_X to AGND –0.3 V to 0.3 V
GND to AGND –0.3 V to 0.3 V
PWM_X, OC_ADJ, M1, M2, M3 to
AGND
–0.3 V to 4.2 V
RESET_X, SD, OTW to AGND –0.3 V to 7 V
Maximum continuous sink current (SD,
OTW)
9 mA
Maximum operating junction
temperature range, T
J
0°C to 125°C
Storage temperature –40_C to 125_C
Lead temperature, 1,6 mm (1/16 inch)
from case for 10 seconds
260_C
Minimum pulse width low 50 ns
(1)
Stresses beyond those listed under “absolute maximum ratings”
may cause permanent damage to the device. These are stress
ratings only, and functional operation of the device at these or any
other conditions beyond those indicated under “recommended
operating conditions” is not implied. Exposure to absolute-
maximum-rated conditions for extended periods may affect device
reliability.
(2)
These voltages represent the dc voltage + peak ac waveform
measured at the terminal of the device in all conditions.
Ordering Information
T
A
PACKAGE DESCRIPTION
0°C to 70°C TAS5152DKD 36-pin PSOP3
For the most current specification and package
information, see the TI Web site at www.ti.com.