Datasheet
www.ti.com
2.2 PCB Key Map
SPDIFReceiver 3.3VSMPS
ExternalGVDD
Input
USBController TAS5086
TAS5132
3 Quick Setup Guide
3.1 Electrostatic Discharge Warning
3.2 Unpacking the EVM
Quick Setup Guide
Physical structure for the TAS5132DDV2EVM is illustrated in Figure 2 .
Figure 2. Physical Structure for TAS5132DDV2EVM (Rough Outline)
This section describes the TAS5132DDV2EVM board in regards to power supplies and system interfaces.
It provides information regarding handling and unpacking, absolute operating conditions, and a description
of the factory default switch and jumper configuration.
The section also provides a step-by-step guide to configuring the TAS5132DDV2EVM for device
evaluation.
Many components on the TAS5132DDV2EVM are susceptible to damage by electrostatic discharge
(ESD). Customers are advised to observe proper ESD handling precautions when unpacking and handling
the EVM, including the use of a grounded wrist strap at an approved ESD workstation.
CAUTION
Failure to observe ESD handling procedures may result in damage to EVM
components.
On opening the TAS5086-5132V2EVM package, ensure that the following items are included:
• 1 pc. TAS5132DDV2EVM Power Stage Board
SLLU097 – April 2007 TAS5132DDV2EVM for the TAS5132 Digital Amplifier Power Output Stage 7
Submit Documentation Feedback