Datasheet

PWM OUTPUT MUX REGISTER (0x25)
TAS5086
SLES131C – FEBRUARY 2005 – REVISED JUNE 2008 ................................................................................................................................................... www.ti.com
Table 21. AM Tuned Frequency Register in Binary Mode
D15 D14 D13 D12 D11 D10 D9 D8 FUNCTION
0 0 0 0 0 X X X Binary frequency
– – – – – – – –
0 0 0 0 0 0 0 0 Default value
D7 D6 D5 D4 D3 D2 D1 D0 FUNCTION
X X X X X X X X Binary frequency
– – – – – – – –
0 0 0 0 0 0 0 0 Default value
This TAS5086 output multiplexer selects which internal PWM channel is output to which pin. Any channel can be
output to any pin. The default values are used in systems with the TAS5186.
Bits D31 – D25: Reserved = 0x00
Bits D23 – D20: Select which PWM channel is output to PWM_1 (pin 38)
Bits D19 – D16: Select which PWM channel is output to PWM_2 (pin 37)
Bits D15 – D12: Select which PWM channel is output to PWM_3 (pin 36)
Bits D11 – D08: Select which PWM channel is output to PWM_4 (pin 35)
Bits D07 – D04: Select which PWM channel is output to PWM_5 (pin 34)
Bits D03 – D00: Select which PWM channel is output to PWM_6 (pin 33)
Note that channels are encoded so that channel 1 = 0x00, channel 2 = 0x01, … , channel 6 = 0x05.
40 Submit Documentation Feedback Copyright © 2005 – 2008, Texas Instruments Incorporated
Product Folder Link(s): TAS5086