Datasheet

3.3 Control Interface
Control Interface www.ti.com
This interface connects the TAS3208 to an external controller. This is a general purpose interface.
Table 3-5. Control Interface (J6)
HEADER
SIGNAL NAME SCHEMATIC NET NAME
PIN ASSIGNMENT
Ground GND 1
Not connected NC 2
Mute GND 3
General purpose input/output 2 GPIO2 4
General purpose input/output 1 GPIO1 5
General purpose input/output 3 GPIO3 6
General purpose input/output 4 GPIO4 7
Ground GND 8
Ground GND 9
Serial clock 1 SCL1 10
Ground GND 11
Serial data 1 SDA1 12
System Interfaces20 SLEU097 – April 2008
Submit Documentation Feedback