Datasheet

1−1

1 Introduction

The TAS3103 is a fully configurable digital audio processor that preserves high-quality audio by using a 48-bit data

path, 28-bit filter coefficients, and a single cycle 28 x 48-bit multiplier and 76-bit accumulator. Because of the

coefficient-configurable fixed-program architecture of the TAS3103, a complete set of user-specific audio processing

functions can be realized, with short development times, in a small, low power, low-cost device. A personal computer

(PC) GUI-based software development package and a comprehensive evaluation board provide additional facilities

to further reduce development times. The TAS3103 uses 1.8-V core logic with 3.3-V I/O buffers, and requires only

3.3-V power. The TAS3103 is available in a 38-pin TSSOP package.

1.1 Features

• Audio Input/Output

− Four Serial Audio Input Channels

− Three Serial Audio Output Channels

− 8-kHz to 96-kHz Sample Rates Supported

− 15 Stereo/TDM Data Formats Supported

− Input/Output Data Format Selections Independent

− 16-, 18-, 20-, 24-, and 32-Bit Word Sizes Supported

• Serial Master/Slave I

C Control Channel

• Three Independent Monaural Processing Channels

− Programmable Four Stereo Input Digital Mixer

− 3D Effect and Reverb Structure and Filters

− Programmable 12 Band Digital Parametric EQ

− Programmable Digital Bass and Treble Controls

− Programmable Digital Soft Volume Control (24 dB to −-∞ dB)

− Soft Mute/Unmute

− Programmable Dither

− Programmable Loudness Compensation

− VU Meter and Spectral Analysis I

C Output

− Programmable Channel Delay (Up to 42 ms at 48 kHz)

− 192-dB Dynamic Range (Supports Up to 32-Bit Audio Data)

− Dual Threshold Dynamic Range Compression/Expansion

• Electrical and Physical

− Single 3.3-V Power Supply

− 38-Pin TSSOP Package

− Low Power Standby