Datasheet

SRC4392

www.ti.com

SBFS029D –DECEMBER 2005–REVISED DECEMBER 2012

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with

appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.

ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more

susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.

ORDERING INFORMATION

(1)

SPECIFIED

PACKAGE TEMPERATURE PACKAGE ORDERING TRANSPORT MEDIA,

PRODUCT PACKAGE DESIGNATOR RANGE MARKING NUMBER QUANTITY

SRC4392IPFBT Tape and Reel, 250

TQFP-48 PFB –40°C to +85°C SRC4392I

SRC4392IPFBR Tape and Reel, 2000

SRC4392

SRC4392RKP Tape and Reel, 250

QFN-40 RKP –40°C to +85°C SRC4392

SRC4392RKPR Tape and Reel, 2000

(1) For the most current package and ordering information see the Package Option Addendum at the end of this document, or see the TI

web site at www.ti.com.

ABSOLUTE MAXIMUM RATINGS

(1)

Power Supplies

VDD18 –0.3V to +2.0V

VDD33 –0.3V to +4.0V

VIO –0.3V to +4.0V

VCC –0.3V to +4.0V

Digital Input Voltage: Digital Logic

RXCKI, MUTE, CPM, CS, CCLK, CDIN, CDOUT, INT, RST, MCLK, BLS, SYNC, BCKA,

–0.3V to (VIO + 0.3V)

BCKB, LRCKA, LRCKB, SDINA, SDINB

Line Receiver Input Voltage (per pin)

RX1+, RX1–, RX2+, RX2–, RX3+, RX3–, RX4+, RX4– (VDD33 + 0.3) V

Input Current (all pins except power and ground) ±10mA

Ambient Operating Temperature –40°C to +85°C

Storage Temperature –65°C to +150°C

(1) These limits are stress ratings only. Stresses beyond these limits may result in permanent damage. Extended exposure to absolute

maximum ratings may degrade device reliability. Normal operation or performance at or beyond these limits is not specified or ensured.

Product Folder Links: SRC4392