Manualshelf

Use Instructions

ManualsBrandsTexas Instruments ManualsHealth MonitorsSpiroSphere is a diagnostic compact device to measure inspiratory and expiratory lung function parameters
71727374757677787980
SpiroSphere
®
ECG Instructions for Use
Page 77/136
Version 02.02 • 04AUG2022
Select “ECG Unit connection” from the ECG Settings menu.
1. On your ECG Unit press and hold the power button until the blue LED blinks
fast. This will take approximately 20 seconds.
2. After further few seconds, the ECG unit will be listed in the above screen.
3. Select the ECG unit you wish to pair, and push “Pair” from the y out menu:
4. The ECG unit will then change to state “Active” and is ready to use.
The Bluetooth radio link has a limited range. The distance between the
ECG unit and the receiving/display device can therefore impact the
quality of the Bluetooth connection. Keep it as short as possible and free
of objects between them. If the Bluetooth transmission fails for more
than 10 seconds, the latest ECG data are erased and therefore lost for
the recording.
The separation of the point-to-point Bluetooth connection from another
network (e.g. intranet, internet) is the responsibility of the operator. If
the point-to-point Bluetooth connection is not active for more than 10
minutes, the connection will be terminated. Any ECG data not already
transmitted from the ECG unit will be lost after 10 seconds (see above).