Use Instructions

SpiroSphere
®
ECG Instructions for Use
Page 14/136
Version 02.02 • 04AUG2022
Problem Troubleshooting
SpiroSphere Sensor
orange LED is blinking
fast
(error in SpiroSphere
Sensor)
Press the power button of the SpiroSphere Sensor for more than 8
seconds to switch off the SpiroSphere Sensor.
Then restart by pressing the power button for min. 3 seconds.
Try to identify the SpiroSphere Sensor in the Spirometry Settings.
Finger prints not
recognized
Clean and dry the ngerprint sensor
Restart the SpiroSphere Main Unit
Touch Screen not
reacting on touch
Press the power button for more than 8 seconds to power off the
SpiroSphere Main Unit.
Then restart by pressing the power button for min 3 seconds.
No Flow detect Check if ERT PT is inserted correctly.
Press the power button of the SpiroSphere Sensor for more than 8
seconds to power off. Then restart by pressing the power button for
more than 3 seconds.
SpiroSphere Sensor is
not charging
Check if the power supply is connected to the SpiroSphere Main
Unit. The SpiroSphere Sensor will only be charged if the power
supply is connected.
Check if the SpiroSphere sensor is inserted correctly in the cradle.
SpiroSphere Sensor might be fully discharged; place it in the
cradle and wait a few minutes then try to power on the SpiroSphere
Sensor by pressing the power button for more than 3 seconds.
SpiroSphere Main Unit is
not charging
Check if the power supply is connected to mains supply.
Check if power supply is connected to the SpiroSphere Main Unit.