Datasheet

www.ti.com
ABSOLUTE MAXIMUM RATINGS
(1)
DISSIPATION RATINGS
THERMAL CHARACTERISTICS
RECOMMENDED OPERATING CONDITIONS
SN75LVDT1422
SLLS653 – JUNE 2005
UNIT
Supply voltage range, V
CC
(2)
–0.5 V to 4 V
Voltage range at any terminal –0.3 V to V
CC
+ 0.3 V
Human Body Model
(3)
(All pins) ± 5 kV
Electrostatic discharge Machine Model
(4)
(All pins) ± 200 V
Charged-Device Model
(5)
(All pins) ± 500 V
Continuous power dissipation See Dissipation Rating Table
Storage temperature range –65 ° C to 125 ° C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to the GND terminals
(3) In accordance with JEDEC Standard 22, Test Method A114-A.
(4) In accordance with JEDEC Standard 22, Test Method A115.
(5) In accordance with JEDEC Standard 22, Test Method C101.
CIRCUIT DERATING FACTOR
(1)
T
A
= 70 ° C
PACKAGE T
A
≤ 25 ° C
BOARD MODEL ABOVE T
A
= 25 ° C POWER RATING
TQFP (PAG) Low-K
(2)
813 mW 8.13 mW/ ° C 448 mW
TQFP (PAG) High-K
(3)
1076 mW 10.76 mW/ ° C 592 mW
(1) This is the inverse of the junction-to-ambient thermal resistance when board-mounted and with no air flow.
(2) In accordance with the Low-K thermal metric definitions of EIA/JESD51-2.
(3) In accordance with the High-K thermal metric definitions of EIA/JESD51-6.
PARAMETER TEST CONDITIONS VALUE UNIT
R
θJB
Junction-to-board thermal resistance 69.5
° C/ W
R
θJC
Junction-to-case thermal resistance 39.2
Typical V
CC
= 3.3 V, T
A
= 25 ° C, f = 100 MHz 357.4
P
D
Device power dissipation mW
Maximum V
CC
= 3.6 V, T
A
= 70 ° C , f = 100 MHz 455.8
MIN NOM MAX UNIT
V
CC
Supply voltage 3 3.3 3.6 V
V
IH
High-level input voltage 2 V
CC
V
V
IL
Low-level input voltage GND 0.8 V
|V
ID
| Magnitude of differential input voltage 0.1 0.6 V
V
IC
Common-mode input voltage range, receiver |VID|/2 2.4 – |VID|/2 V
T
A
Operating free-air temperature –10 70 ° C
V
N
Supply noise voltage, V
CC
–50 50 mV
f
c
Clock frequency 10 100 MHz
5