Datasheet

 
 
SLLS318D − NOVEMBER 1998 − REVISED NOVEMBER 2007
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
†
Supply voltage range, V
CC
(see Note 1) −0.5 V to 4 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Voltage range at any terminal −0.5 V to V
CC
+ 0.5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrostatic discharge (see Note 2): All pins (Class 3A) 4 KV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
All pins (Class 2B) 200 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous total power dissipation See Dissipation Rating Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating virtual junction temperature range, T
J
−40_C to 150_C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range, T
stg
−65_C to 150_C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lead temperature 1,6 mm (1/16 in) from case for 10 s 260_C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values are with respect to the GND terminals unless otherwise noted.
2. This rating is measured using MIL-STD-883C Method, 3015.7.
DISSIPATION RATING TABLE
PACKAGE
T
A
≤ 25°C
POWER RATING
DERATING FACTOR
‡
ABOVE T
A
= 25°C
T
A
= 70°C
POWER RATING
T
A
= 125°C
POWER RATING
DGG 1637 mW 13.1 mW/°C 1048 mW 327 mW
‡
This is the inverse of the junction-to-ambient thermal resistance when board mounted and with no air flow.
recommended operating conditions (see Figure 2)
MIN NOM MAX UNIT
Supply voltage, V
CC
3 3.3 3.6 V
High-level input voltage, V
IH
(SHTDN) 2 V
Low-level input voltage, V
IL
(SHTDN) 0.8 V
Magnitude differential input voltage, |V
ID
| 0.1 0.6 V
Common-mode input voltage, V
IC
|V
ID
|
2
2.4 *
|V
ID
|
2
V
Operating free-air temperature, T
A
SN75LVDS86A 0 70
°C
Operating free-air temperature, T
A
SN65LVDS86A −40 125
°C
timing requirements
MIN NOM MAX UNIT
Cycle time, input clock, t
c
§
14.7 t
c
32.4 ns
§
Parameter t
c
is defined as the mean duration of a minimum of 32000 clock cycles.