Datasheet

SN75DP139
SLLS977D –APRIL 2009–REVISED JULY 2013 www.ti.com
ORDERING INFORMATION
(1)
PART NUMBER PART MARKING PACKAGE
SN75DP139RGZR DP139 48-pin QFN Reel (large)
SN75DP139RGZT DP139 48-pin QFN Reel (small)
SN75DP139RSBR DP139 40-pin QFN Reel (large)
SN75DP139RSBT DP139 40-pin QFN Reel (small)
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range (unless otherwise noted)
(1)
VALUE UNIT
Supply voltage range
(2)
VCC –0.3 to 3.6 V
Main Link Input (IN_Dx) differential voltage –0.3 to VCC + 0.3 V
TMDS Outputs (OUT_Dx) –0.3 to VCC + 0.3
Voltage range
HPD_SOURCE, SDA_SOURCE, SCL_SOURCE, OVS,
–0.3 to VCC + 0.3
DDC_EN, VSadj, SRC, I
2
C_EN
HPD_SINK, SDA_SINK, SCL_SINK, OE_EN, HPDINV –0.3 to 5.5
Human body model
(3)
±10000 V
Electrostatic discharge Charged-device model
(4)
±1500
Machine model
(5)
±200
Continuous power dissipation See Dissipation Rating Table
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only and functional operation of the device at these or any conditions beyond those indicated under recommended operating conditions
is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values, except differential voltages, are with respect to network ground terminal.
(3) Tested in accordance with JEDEC Standard 22, Test Method A114-B
(4) Tested in accordance with JEDEC Standard 22, Test Method C101-A
(5) Tested in accordance with JEDEC Standard 22, Test Method A115-A
10 Submit Documentation Feedback Copyright © 2009–2013, Texas Instruments Incorporated
Product Folder Links: SN75DP139