Datasheet
www.ti.com
Absolute Maximum Ratings
(1)
Recommended Operating Conditions
(1)
SN74LVC2G53
SINGLE-POLE DOUBLE-THROW (SPDT) ANALOG SWITCH
2:1 ANALOG MULTIPLEXER/DEMULTIPLEXER
SCES324M – JULY 2001 – REVISED FEBRUARY 2007
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
V
CC
Supply voltage range
(2)
–0.5 6.5 V
V
I
Input voltage range
(2) (3)
–0.5 6.5 V
V
O
Switch I/O voltage range
(2) (3) (4)
–0.5 V
CC
+ 0.5 V
I
IK
Control input clamp current V
I
< 0 –50 mA
I
I/OK
I/O port diode current V
I/O
< 0 or V
I/O
> V
CC
± 50 mA
I
T
On-state switch current V
I/O
= 0 to V
CC
± 50 mA
Continuous current through V
CC
or GND ± 100 mA
DCT package 220
θ
JA
Package thermal impedance
(5)
DCU package 227 ° C/W
YZP package 102
T
stg
Storage temperature range –65 150 ° C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltages are with respect to ground, unless otherwise specified.
(3) The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
(4) This value is limited to 5.5 V maximum.
(5) The package thermal impedance is calculated in accordance with JESD 51-7.
MIN MAX UNIT
V
CC
Supply voltage 1.65 5.5 V
V
I/O
I/O port voltage 0 V
CC
V
V
CC
= 1.65 V to 1.95 V V
CC
× 0.65
V
CC
= 2.3 V to 2.7 V V
CC
× 0.7
V
IH
High-level input voltage, control input V
V
CC
= 3 V to 3.6 V V
CC
× 0.7
V
CC
= 4.5 V to 5.5 V V
CC
× 0.7
V
CC
= 1.65 V to 1.95 V V
CC
× 0.35
V
CC
= 2.3 V to 2.7 V V
CC
× 0.3
V
IL
Low-level input voltage, control input V
V
CC
= 3 V to 3.6 V V
CC
× 0.3
V
CC
= 4.5 V to 5.5 V V
CC
× 0.3
V
I
Control input voltage 0 5.5 V
V
CC
= 1.65 V to 1.95 V 20
V
CC
= 2.3 V to 2.7 V 20
∆ t/ ∆ v Input transition rise/fall time ns/V
V
CC
= 3 V to 3.6 V 10
V
CC
= 4.5 V to 5.5 V 10
T
A
Operating free-air temperature –40 85 ° C
(1) All unused inputs of the device must be held at V
CC
or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
3
Submit Documentation Feedback