Datasheet

SN74LVC1G3157
www.ti.com SCES424H –JANUARY 2003–REVISED MAY 2012
Absolute Maximum Ratings
(1)
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
V
CC
Supply voltage range
(2)
–0.5 6.5 V
V
IN
Control input voltage range
(2) (3)
–0.5 6.5 V
V
I/O
Switch I/O voltage range
(2) (3) (4) (5)
–0.5 V
CC
+ 0.5 V
I
IK
Control input clamp current V
IN
< 0 –50 mA
I
I/O
I/O port diode current V
I/O
< 0 or V
I/O
> V
CC
±50 mA
I
I/O
On-state switch current
(6)
V
I/O
= 0 to V
CC
±128 mA
Continuous current through V
CC
or GND ±100 mA
DBV package 165
DCK package 259
θ
JA
Package thermal impedance
(7)
DRL package 142 °C/W
DRY package 234
YZP package 123
T
stg
Storage temperature range –65 150 °C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltages are with respect to ground unless otherwise specified.
(3) The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
(4) This value is limited to 5.5 V maximum.
(5) V
I
, V
O
, V
A
, and V
Bn
are used to denote specific conditions for V
I/O
.
(6) I
I
, I
O
, I
A
, and I
Bn
are used to denote specific conditions for I
I/O
.
(7) The package thermal impedance is calculated in accordance with JESD 51-7.
Copyright © 2003–2012, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Link(s): SN74LVC1G3157