Datasheet

www.ti.com
DESCRIPTION/ORDERING INFORMATION (CONTINUED)
G
A0
Y0
1
3
7
A1
6
Y1
2
Y2
5
Absolute Maximum Ratings
(1)
SN74LVC1G29
2-OF-3 DECODER/DEMULTIPLEXER
SCES569B – JUNE 2004 – REVISED JANUARY 2007
This device is fully specified for partial-power-down applications using I
off
. The I
off
circuitry disable the outputs,
preventing damaging current backflow through the device when it is powered down.
NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the
package.
FUNCTION TABLE
INPUTS OUTPUTS
G A1 A0 Y0 Y1 Y2
L L X L H H
L H L H L H
L H H H H L
H X X H H H
LOGIC DIAGRAM (POSITIVE LOGIC)
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
V
CC
Supply voltage range –0.5 6.5 V
V
I
Input voltage range
(2)
–0.5 6.5 V
V
O
Voltage range applied to any output in the high-impedance or power-off state
(2)
–0.5 6.5 V
V
O
Voltage range applied to any output in the high or low state
(2) (3)
–0.5 V
CC
+ 0.5 V
I
IK
Input clamp current V
I
< 0 –50 mA
I
OK
Output clamp current V
O
< 0 –50 mA
I
O
Continuous output current ± 50 mA
Continuous current through V
CC
or GND ± 100 mA
DCT package 220
θ
JA
Package thermal impedance
(4)
DCU package 227 ° C/W
YZP package 102
T
stg
Storage temperature range –65 150 ° C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input and output negative-voltage ratings may be exceeded if the input and output current ratings are observed.
(3) The value of V
CC
is provided in the recommended operating conditions table.
(4) The package thermal impedance is calculated in accordance with JESD 51-7.
2
Submit Documentation Feedback