Datasheet


 
SCLS555 − JUNE 2004
www.ti.com
2
ORDERING INFORMATION
T
A
PACKAGE
(1)
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
PDIP − N Tube SN74LV8153N SN74LV8153N
−40°C to 85°C
TSSOP − PW
Tube SN74LV8153PW
LV8153
−40 C to 85 C
TSSOP − PW
Tape and reel SN74LV8153PWR
LV8153
(1)
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
PIN DESCRIPTION
PIN # PIN NAME I/O PIN FUNCTION
1 V
CC1
Power-supply pin (all inputs and outputs except for Y0-Y7)
2-4 A0, A1, A2 In
The address pins are used to program the address of the device and allow up to eight
devices to share the same bus.
5 D In Serial data input
6 OUTSEL In Choose between open-collector and push-pull type outputs (Y0-Y7).
7 RESET In Initialize register status
8 OE In Force Y0-Y7 to Hi-Z
9 SOUT Out Outputs a pulse when latch data is changed. Supplied by V
CC1
.
12-19 Y0-Y7 Out Push-pull or open collector parallel data outputs. Supplied by V
CC2
.
20 V
CC2
Power-supply pin for outputs (Y0-Y7). V
CC2
can range from 3 V to 13.2 V.