Datasheet

SN54LV4052A , SN74LV4052A
www.ti.com SCLS429J –MAY 1999–REVISED OCTOBER 2012
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range (unless otherwise noted)
(1)
VALUE UNIT
Supply voltage range, V
CC
–0.5 to 7.0 V
Input voltage range, V
I
(2)
–0.5 to 7.0 V
Switch I/O voltage range, V
IO
(2)(3)
–0.5 to V
CC
+ 0.5 V
Input clamp current, I
IK
(V
I
< 0) –20 mA
I/O diode current, I
IOK
(V
IO
< 0) –50 mA
Switch through current, I
T
(V
IO
= 0 to V
CC
) ±25 mA
Continuous current through VCC or GND ±50 mA
D package
(4)
73
DB package
(4)
82
DGV package
(4)
120
Package thermal impedance, θ
JA
N package
(4)
67 °C/W
NS package
(4)
64
PW package
(4)
108
RGY package
(5)
39
Storage temperature range, T
stg
–65 to 150 °C
(1) Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating
conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input and output negative-voltage ratings may be exceeded if the input and output current ratings are observed.
(3) This value is limited to 5.5 V maximum.
(4) The package thermal impedance is calculated in accordance with JESD 51-7.
(5) The package thermal impedance is calculated in accordance with JESD 51-5.
RECOMMENDED OPERATING CONDITIONS (see
(1)
)
SN54LV4052A
(2)
SN74LV4052A
UNIT
MIN MAX MIN MAX
V
CC
Supply voltage 2
(3)
5.5 2
(3)
5.5 V
V
CC
= 2 V 1.5 1.5
V
CC
= 2.3 V to 2.7 V V
CC
× 0.7 V
CC
× 0.7
High-level input voltage, control
V
IH
V
inputs
V
CC
= 3 V to 3.6 V V
CC
× 0.7 V
CC
× 0.7
V
CC
= 4.5 V to 5.5 V V
CC
× 0.7 V
CC
× 0.7
V
CC
= 2 V 0.5 0.5
V
CC
= 2.3 V to 2.7 V V
CC
× 0.3 V
CC
× 0.3
Low-level input voltage, control
V
IL
V
inputs
V
CC
= 3 V to 3.6 V V
CC
× 0.3 V
CC
× 0.3
V
CC
= 4.5 V to 5.5 V V
CC
× 0.3 V
CC
× 0.3
V
I
Control input voltage 0 5.5 0 5.5 V
V
IO
Input/output voltage 0 V
CC
0 V
CC
V
V
CC
= 2.3 V to 2.7 V 200 200
Δt/Δv Input transition rise or fall rate V
CC
= 3 V to 3.6 V 100 100 ns/V
V
CC
= 4.5 V to 5.5 V 20 20
T
A
Operating free-air temperature –55 125 –40 85 °C
(1) All unused inputs of the device must be held at V
CC
or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
(2) Product Preview
(3) With supply voltages at or near 2 V, the analog switch on-state resistance becomes very nonlinear. It is recommended that only digital
signals be transmitted at these low supply voltages.
Copyright © 1999–2012, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Links: SN54LV4052A SN74LV4052A