Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLogic ICsLogic IC - Gate and inverter NAND gate Automotive, AECQ-100, 74HC TSSOP 14

SN74HC132-Q1

QUADRUPLE POSITIVE-NAND GATE

WITH SCHMITT-TRIGGER INPUTS

SCLS553A − JANUARY 2004 − REVISED APRIL 2008

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

D Qualified for Automotive Applications

D Wide Operating Voltage Range of 2 V to 6 V

D Outputs Can Drive Up To 10 LSTTL Loads

D Low Power Consumption, 40-µA Max I

D Typical t

= 14 ns

D ±4-mA Output Drive at 5 V

D Low Input Current of 1 µA Max

D Operation From Very Slow Input

Transitions

D Temperature-Compensated Threshold

Levels

D High Noise Immunity

D Same Pinouts as ’HC00

description/ordering information

Each circuit functions as a NAND gate, but because of

the Schmitt action, it has different input threshold levels

for positive- and negative-going signals. The

SN74HC132 performs the Boolean function Y = A

• B or

Y = A

+ B in positive logic.

This circuit is temperature compensated and can be triggered from the slowest of input ramps and still give clean

jitter-free output signals.

ORDERING INFORMATION

{

PACKAGE

‡

ORDERABLE

PART NUMBER

TOP-SIDE

MARKING

40°C to 125°C

SOIC − D Reel of 2500 SN74HC132QDRQ1 HC132Q1

−40°C to 125°C

TSSOP − PW Reel of 2000 SN74HC132QPWRQ1 HC132Q1

†

For the most current package and ordering information, see the Package Option Addendum at the end of

this document, or see the TI web site at http://www.ti.com.

‡

Package drawings, thermal data, and symbolization are available at http://www.ti.com/packaging.

FUNCTION TABLE

(each gate)

INPUTS

OUTPUT

A B

OUTPUT

H H L

L XH

X L H

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

GND

D OR PW PACKAGE

(TOP VIEW)

Summary of content (12 pages)

PAGE 1
SN74HC132-Q1 QUADRUPLE POSITIVE-NAND GATE WITH SCHMITT-TRIGGER INPUTS SCLS553A − JANUARY 2004 − REVISED APRIL 2008 D D D D D D D D D Temperature-Compensated Threshold Qualified for Automotive Applications Wide Operating Voltage Range of 2 V to 6 V Outputs Can Drive Up To 10 LSTTL Loads Low Power Consumption, 40-µA Max ICC Typical tpd = 14 ns ±4-mA Output Drive at 5 V Low Input Current of 1 µA Max Operation From Very Slow Input Transitions Levels D High Noise Immunity D Same Pinouts as ’HC00 D OR PW PAC
PAGE 2
SN74HC132-Q1 QUADRUPLE POSITIVE-NAND GATE WITH SCHMITT-TRIGGER INPUTS SCLS553A − JANUARY 2004 − REVISED APRIL 2008 logic diagram (positive logic) A Y B absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 7 V Input clamp current, IIK (VI < 0 or VI > VCC) (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 3
SN74HC132-Q1 QUADRUPLE POSITIVE-NAND GATE WITH SCHMITT-TRIGGER INPUTS SCLS553A − JANUARY 2004 − REVISED APRIL 2008 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VCC VT+ VT− VT+ − VT− IOH = −20 20 µA VOH VI = VIH or VIL IOH = −4 mA IOH = −5.2 mA IOL = 20 µA VOL VI = VIH or VIL IOL = 4 mA IOL = 5.2 mA II VI = VCC or 0 ICC VI = VCC or 0, IO = 0 TA = 25°C MIN TYP MIN MAX 2V 0.7 1.2 1.5 0.7 1.5 4.
PAGE 4
SN74HC132-Q1 QUADRUPLE POSITIVE-NAND GATE WITH SCHMITT-TRIGGER INPUTS SCLS553A − JANUARY 2004 − REVISED APRIL 2008 PARAMETER MEASUREMENT INFORMATION From Output Under Test VCC Test Point Input 50% 50% 0V CL = 50 pF (see Note A) tPLH In-Phase Output LOAD CIRCUIT 50% 10% tPHL 90% 90% tr Input 50% 10% 90% 90% tr tPHL VCC 50% 10% 0 V Out-of-Phase Output 90% tf VOLTAGE WAVEFORM INPUT RISE AND FALL TIMES VOH 50% 10% VOL tf tPLH 50% 10% tf 50% 10% 90% VOH VOL tr VOLTAGE WAVEFORMS PROP
PAGE 5
PACKAGE OPTION ADDENDUM www.ti.
PAGE 6
PACKAGE OPTION ADDENDUM www.ti.
PAGE 7
PACKAGE MATERIALS INFORMATION www.ti.com 14-Mar-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SN74HC132QPWRG4Q1 TSSOP SN74HC132QPWRQ1 TSSOP SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.
PAGE 8
PACKAGE MATERIALS INFORMATION www.ti.com 14-Mar-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74HC132QPWRG4Q1 TSSOP PW 14 2000 367.0 367.0 35.0 SN74HC132QPWRQ1 TSSOP PW 14 2000 367.0 367.0 35.
PAGE 9
PAGE 10
PAGE 11
PAGE 12
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.