Datasheet

ORDERING INSTRUCTIONS
8–3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
Electrical characteristics presented in this data book, unless otherwise noted, apply for the circuit type(s) listed in the
page heading regardless of package. The availability of a circuit function in a particular package is denoted by an
alphabetical reference above the pin-connection diagram(s). These alphabetical references refer to mechanical
outline drawings shown in this section.
Factory orders for circuits described in this data book should include a four-part type number as explained in the
following example.
EXAMPLE: 74GTLPH32945 DGG R
Prefix
Unique Circuit Description
Package
Tape and Reel Packaging
SN = Standard prefix
SNJ = Compliant to MIL-PRF-38535 (QML)
MUST CONTAIN EIGHT TO TWELVE CHARACTERS
SN
D, DW = plastic small-outline package
DGG, PW = plastic thin shrink small-outline package
DGV = plastic thin very small-outline package
DL = plastic shrink small-outline package
GKE, GKF = plastic ball-grid array
PCA = plastic thin quad flatpack
RC = plastic quad flatpack
WD = ceramic dual flatpack
(from pin-connection diagram on individual data sheet)
Valid for surface-mount packages only. All orders for tape and reel must be for whole reels.
Examples: 74FB1650
74GTLP2033
74GTLPH32945
MUST CONTAIN ONE TO THREE LETTERS
MUST CONTAIN ONE LETTER
R = Standard tape and reel (required for DBB, DGG, and DGV; optional for D, DL,
and DW packages)
NOTE: For order entry for some devices, the package designation
must be abbreviated as indicated on the data sheet.