Datasheet

Oscilloscope Setup
7–350
3.1 Oscilloscope Setup
The recommended oscilloscope (O-Scope) for the GTLP EVM is the Tektronix
THS730A (see Figure 3–1). It allows only two-channel operation, which should
be sufficient for most investigations done with the demonstration backplane.
Figure 3–1. Tektronix O-Scope Front (Left) and Top (Right)
SMB adapters (see Figure 3–2) are needed to properly mate Tektronix probes
with the test points. These adapters are custom built for the Tektronix O-Scope
probes and are not normally included in the GTLP EVM.
Figure 3–2. O-Scope Probe Monitor-Point Adapters