Datasheet

Backplane Setup
7–343 GTLP EVM Board Typical Test and Setup Configuration
2.13.2 Insertion of Clock Crystals
Clock crystals are live insertable, unlike the clock card, which is not live
insertable. Clock crystals are inserted easily on the clock card by pulling off
one crystal and inserting the new crystal (see Figure 2–26). The leads can be
bent gently to ease insertion. The clock crystal need not be inserted fully flush
with the card for proper operation. In fact, this condition is preferred if the clock
card is stored with the crystal inserted, otherwise, the foam liner can bend the
exposed leads.
Figure 2–26. Clock Crystal Removal (Left) and Insertion (Right)