Datasheet

www.ti.com
DESCRIPTION/ORDERING INFORMATION (CONTINUED)
GTL2010
10-BIT BIDIRECTIONAL LOW-VOLTAGE TRANSLATOR
SCDS221 – SEPTEMBER 2006
All transistors in the GTL2010 have the same electrical characteristics, and there is minimal deviation from one
output to another in voltage or propagation delay. This offers superior matching over discrete transistor
voltage-translation solutions where the fabrication of the transistors is not symmetrical. With all transistors being
identical, the reference transistor (S
REF
/D
REF
) can be located on any of the other ten matched Sn/Dn transistors,
allowing for easier board layout. The translator transistors with integrated ESD circuitry provides excellent ESD
protection.
ORDERING INFORMATION
T
A
PACKAGE
(1)
ORDERABLE PART NUMBER TOP-SIDE MARKING
–40 ° C to 85 ° C TSSOP – PW Tape and reel SN74GTL2010PWR GK2010
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
PIN DESCRIPTION
PIN NO. NAME DESCRIPTION
1 GND Ground (0 V)
2 S
REF
Source of reference transistor
3–12 Sn Ports S1–10
13–22 Dn Ports D10–D1
23 D
REF
Drain of reference transistor
24 G
REF
Gate of reference transistor
2
Submit Documentation Feedback