Datasheet

www.ti.com
Absolute Maximum Ratings
(1)
Recommended Operating Conditions
(1)
SN74CBTLV3245A
LOW-VOLTAGE OCTAL FET BUS SWITCH
SCDS034M – JULY 1997 – REVISED AUGUST 2005
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
V
CC
Supply voltage range –0.5 4.6 V
V
I
Input voltage range
(2)
–0.5 4.6 V
Continuous channel current 128 mA
I
IK
Input clamp current V
I/O
< 0 –50 mA
DBQ package
(3)
68
DGV package
(3)
92
θ
JA
Package thermal impedance DW package
(3)
58 ° C/W
PW package
(3)
83
RGY package
(4)
37
T
stg
Storage temperature range –65 150 ° C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
(3) The package thermal impedance is calculated in accordance with JESD 51-7.
(4) The package thermal impedance is calculated in accordance with JESD 51-5.
MIN MAX UNIT
V
CC
Supply voltage 2.3 3.6 V
V
CC
= 2.3 V to 2.7 V 1.7
V
IH
High-level control input voltage V
V
CC
= 2.7 V to 3.6 V 2
V
CC
= 2.3 V to 2.7 V 0.7
V
IL
Low-level control input voltage V
V
CC
= 2.7 V to 3.6 V 0.8
T
A
Operating free-air temperature –40 85 ° C
(1) All unused control inputs of the device must be held at V
CC
or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
3