Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLogic ICsLogic IC - Buffer, driver SC 70 5

DBVPACKAGE

(TOP VIEW)

GND Y

DCKPACKAGE

(TOP VIEW)

GND

DRY PACKAGE

(TOP VIEW)

A NC

GND

N.C.

DSF PACKAGE

(TOP VIEW)

YZP PACKAGE

(TOP VIEW)

YFP PACKAGE

(TOP VIEW)

GND

N.C.

SN74AUP1G240

www.ti.com

SCES627C –MARCH 2005–REVISED MAY 2010

LOW-POWER SINGLE BUFFER/DRIVER WITH 3-STATE OUTPUT

Check for Samples: SN74AUP1G240

FEATURES

• Available in the Texas Instruments NanoStar™ • Input Hysteresis Allows Slow Input Transition

Package and Better Switching Noise Immunity at the

Input

• Low Static-Power Consumption

• Wide Operating V

Range of 0.8 V to 3.6 V

– I

= 0.9 mA Max

• Optimized for 3.3-V Operation

• Low Dynamic-Power Consumption

• 3.6-V I/O Tolerant to Support Mixed-Mode

– C

= 4.2 pF at 3.3 V Typ

Signal Operation

• Low Input Capacitance

• t

= 4.7 ns Max at 3.3 V

– C

= 1.5 pF Typ

• Suitable for Point-to-Point Applications

• Low Noise – Overshoot and Undershoot

• Latch-Up Performance Exceeds 100 mA Per

<10% of V

JESD 78, Class II

• Input-Disable Feature Allows Floating Input

• ESD Performance Tested Per JESD 22

Conditions

– 2000-V Human-Body Model

• I

off

Supports Partial Power-Down-Mode

(A114-B, Class II)

Operation

– 1000-V Charged-Device Model (C101)

See mechanical drawings for dimensions.

N.C. – No internal connection

DESCRIPTION/ORDERING INFORMATION

The AUP family is TI's premier solution to the industry's low power needs in battery-powered portable

applications. This family ensures a very low static and dynamic power consumption across the entire V

range

of 0.8 V to 3.6 V, resulting in an increased battery life. This product also maintains excellent signal integrity (see

Figure 1 and Figure 2).

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (24 pages)

PAGE 1
SN74AUP1G240 www.ti.com SCES627C – MARCH 2005 – REVISED MAY 2010 LOW-POWER SINGLE BUFFER/DRIVER WITH 3-STATE OUTPUT Check for Samples: SN74AUP1G240 FEATURES 1 • • • • • • • Available in the Texas Instruments NanoStar™ Package Low Static-Power Consumption – ICC = 0.9 mA Max Low Dynamic-Power Consumption – Cpd = 4.2 pF at 3.3 V Typ Low Input Capacitance – CI = 1.
PAGE 2
SN74AUP1G240 SCES627C – MARCH 2005 – REVISED MAY 2010 Static-Power Consumption (mA) www.ti.com Switching Characteristics Dynamic-Power Consumption (pF) 100% 100% 80% 80% at 25 MHz † 3.5 60% 60% 3.3-V † Logic 40% 40% Voltage - V 3 3.3-V LVC † Logic 2.5 Input 2 1.5 1 Output 0.5 20% 20% AUP 0% † 0 -0.5 AUP 0% 0 † Single, dual, and triple gates. Figure 1. AUP – The Lowest-Power Family 5 10 15 20 25 Time - ns 30 35 40 45 AUP1G08 data at CL = 15 pF. Figure 2.
PAGE 3
SN74AUP1G240 www.ti.com SCES627C – MARCH 2005 – REVISED MAY 2010 ABSOLUTE MAXIMUM RATINGS (1) over operating free-air temperature range (unless otherwise noted) MIN MAX VCC Supply voltage range –0.5 4.6 V VI Input voltage range (2) –0.5 4.6 V VO Voltage range applied to any output in the high-impedance or power-off state (2) –0.5 4.6 V –0.5 VCC + 0.
PAGE 4
SN74AUP1G240 SCES627C – MARCH 2005 – REVISED MAY 2010 www.ti.com ELECTRICAL CHARACTERISTICS over recommended operating free-air temperature range (unless otherwise noted) PARAMETER VOH TEST CONDITIONS VCC MIN 0.8 V to 3.6 V VCC – 0.1 VCC – 0.1 1.1 V 0.75 × VCC 0.7 × VCC IOH = –1.7 mA 1.4 V 1.11 1.03 IOH = –1.9 mA 1.65 V 1.32 1.3 2.05 1.97 2.3 V IOH = –2.7 mA 3V IOH = –4 mA 1.9 1.85 2.72 2.67 2.6 2.55 MAX UNIT V IOL = 20 mA 0.8 V to 3.6 V 0.1 0.1 IOL = 1.1 mA 1.
PAGE 5
SN74AUP1G240 www.ti.com SCES627C – MARCH 2005 – REVISED MAY 2010 SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, CL = 5 pF (unless otherwise noted) (see Figure 3 and Figure 4) PARAMETER FROM (INPUT) TO (OUTPUT) VCC MIN 0.8 V tpd A Y OE Y Y MIN MAX 4.4 7.5 10.3 3.5 15.5 1.5 V ± 0.1 V 3.3 5.4 6.9 2.3 10.3 1.8 V ± 0.15 V 2.6 4.4 5.8 1.8 8.3 2.5 V ± 0.2 V 1.9 3.3 4.3 1.3 5.8 3.3 V ± 0.3 V 1.6 2.7 3.6 1 4.7 ns 16.5 1.2 V ± 0.1 V 4.
PAGE 6
SN74AUP1G240 SCES627C – MARCH 2005 – REVISED MAY 2010 www.ti.com SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, CL = 15 pF (unless otherwise noted) (see Figure 3 and Figure 4) PARAMETER FROM (INPUT) TO (OUTPUT) VCC MIN 0.8 V tpd A Y OE Y OE Y UNIT MAX MIN MAX 1.2 V ± 0.1 V 6.4 9.7 12.9 5.4 19.8 1.5 V ± 0.1 V 4.8 7.1 8.7 3.8 13.3 1.8 V ± 0.15 V 3.9 5.8 7.2 3.1 10.8 2.5 V ± 0.2 V 2.9 4.4 5.4 2.3 7.6 3.3 V ± 0.3 V 2.4 3.6 4.5 1.
PAGE 7
SN74AUP1G240 www.ti.com SCES627C – MARCH 2005 – REVISED MAY 2010 OPERATING CHARACTERISTICS TA = 25°C PARAMETER TEST CONDITIONS VCC 0.8 V Outputs enabled Cpd Power dissipation capacitance f = 10 MHz Outputs disabled TYP 1.2 V ± 0.1 V 3.9 1.5 V ± 0.1 V 3.9 1.8 V ± 0.15 V 3.9 2.5 V ± 0.2 V 4 3.3 V ± 0.3 V 4.2 0.8 V 0 1.2 V ± 0.1 V 0 1.5 V ± 0.1 V 0 1.8 V ± 0.15 V 0 2.5 V ± 0.2 V 0 3.3 V ± 0.
PAGE 8
SN74AUP1G240 SCES627C – MARCH 2005 – REVISED MAY 2010 www.ti.com PARAMETER MEASUREMENT INFORMATION (Propagation Delays, Setup and Hold Times, and Pulse Width) From Output Under Test CL (see Note A) 1 MW LOAD CIRCUIT CL VM VI VCC = 0.8 V VCC = 1.2 V ± 0.1 V VCC = 1.5 V ± 0.1 V VCC = 1.8 V ± 0.15 V VCC = 2.5 V ± 0.2 V VCC = 3.3 V ± 0.
PAGE 9
SN74AUP1G240 www.ti.com SCES627C – MARCH 2005 – REVISED MAY 2010 PARAMETER MEASUREMENT INFORMATION (Enable and Disable Times) 2 ´ VCC S1 5 kW From Output Under Test GND CL (see Note A) 5 kW TEST S1 tPLZ/tPZL tPHZ/tPZH 2 ´ VCC GND LOAD CIRCUIT CL VM VI VD VCC = 0.8 V VCC = 1.2 V ± 0.1 V VCC = 1.5 V ± 0.1 V VCC = 1.8 V ± 0.15 V VCC = 2.5 V ± 0.2 V VCC = 3.3 V ± 0.3 V 5, 10, 15, 30 pF VCC/2 VCC 0.1 V 5, 10, 15, 30 pF VCC/2 VCC 0.1 V 5, 10, 15, 30 pF VCC/2 VCC 0.
PAGE 10
PACKAGE OPTION ADDENDUM www.ti.
PAGE 11
PACKAGE OPTION ADDENDUM www.ti.com 11-Apr-2013 LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device.
PAGE 12
PACKAGE MATERIALS INFORMATION www.ti.com 7-Jun-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ SN74AUP1G240DBVR SOT-23 3000 180.0 8.4 DBV 5 Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 3.23 3.17 1.37 4.0 8.0 Q3 SN74AUP1G240DBVT SOT-23 DBV 5 250 180.0 8.4 3.23 3.17 1.37 4.0 8.0 Q3 SN74AUP1G240DCKR SC70 DCK 5 3000 180.0 9.2 2.3 2.55 1.2 4.0 8.
PAGE 13
PACKAGE MATERIALS INFORMATION www.ti.com 7-Jun-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74AUP1G240DBVR SOT-23 DBV 5 3000 202.0 201.0 28.0 SN74AUP1G240DBVT SOT-23 DBV 5 250 202.0 201.0 28.0 SN74AUP1G240DCKR SC70 DCK 5 3000 205.0 200.0 33.0 SN74AUP1G240DCKR SC70 DCK 5 3000 180.0 180.0 18.0 SN74AUP1G240DCKT SC70 DCK 5 250 180.0 180.0 18.0 SN74AUP1G240DRYR SON DRY 6 5000 180.0 180.
PAGE 14
PAGE 15
PAGE 16
PAGE 17
PAGE 18
PAGE 19
PAGE 20
PAGE 21
PAGE 22
D: Max = 1.418 mm, Min =1.358 mm E: Max = 0.918 mm, Min =0.
PAGE 23
D: Max = 1.19 mm, Min = 1.13 mm E: Max = 0.79 mm, Min = 0.
PAGE 24
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.