Datasheet
SN74AUP1G14
www.ti.com
SCES578I –JUNE 2003–REVISED MAY 2010
ABSOLUTE MAXIMUM RATINGS
(1)
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
V
CC
Supply voltage range –0.5 4.6 V
V
I
Input voltage range
(2)
–0.5 4.6 V
V
O
Voltage range applied to any output in the high-impedance or power-off state
(2)
–0.5 4.6 V
V
O
Voltage range applied to any output in the high or low state
(2)
–0.5 V
CC
+ 0.5 V
I
IK
Input clamp current V
I
< 0 –50 mA
I
OK
Output clamp current V
O
< 0 –50 mA
I
O
Continuous output current ±20 mA
Continuous current through V
CC
or GND ±50 mA
DBV package 206
DCK package 252
DRL package 142
q
JA
Package thermal impedance
(3)
°C/W
DSF package 300
DRY package 234
YFP/YZP package 132
T
stg
Storage temperature range –65 150 °C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input and output negative-voltage ratings may be exceeded if the input and output current ratings are observed.
(3) The package thermal impedance is calculated in accordance with JESD 51-7.
RECOMMENDED OPERATING CONDITIONS
(1)
MIN MAX UNIT
V
CC
Supply voltage 0.8 3.6 V
V
I
Input voltage 0 3.6 V
V
O
Output voltage 0 V
CC
V
V
CC
= 0.8 V –20 mA
V
CC
= 1.1 V –1.1
V
CC
= 1.4 V –1.7
I
OH
High-level output current
V
CC
= 1.65 V –1.9 mA
V
CC
= 2.3 V –3.1
V
CC
= 3 V –4
V
CC
= 0.8 V 20 mA
V
CC
= 1.1 V 1.1
V
CC
= 1.4 V 1.7
I
OL
Low-level output current
V
CC
= 1.65 V 1.9 mA
V
CC
= 2.3 V 3.1
V
CC
= 3 V 4
T
A
Operating free-air temperature –40 85 °C
(1) All unused inputs of the device must be held at V
CC
or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
Copyright © 2003–2010, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Link(s): SN74AUP1G14