Datasheet

A Y
1
3
A Y
2
4
SN74AUP1G04
www.ti.com SCES571J –JUNE 2004–REVISED MAY 2012
LOGIC DIAGRAM (POSITIVE LOGIC)
(DBV, DCK, DRL, and DRY Packages)
(YFP Package)
ABSOLUTE MAXIMUM RATINGS
(1)
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
V
CC
Supply voltage range –0.5 4.6 V
V
I
Input voltage range
(2)
–0.5 4.6 V
V
O
Voltage range applied to any output in the high-impedance or power-off state
(2)
–0.5 4.6 V
V
O
Output voltage range in the high or low state
(2)
–0.5 V
CC
+ 0.5 V
I
IK
Input clamp current V
I
< 0 –50 mA
I
OK
Output clamp current V
O
< 0 –50 mA
I
O
Continuous output current ±20 mA
Continuous current through V
CC
or GND ±50 mA
DBV package 206
DCK package 252
DRL package 142
θ
JA
Package thermal impedance
(3)
°C/W
DSF package 300
DRY package 234
YFP package 132
T
stg
Storage temperature range –65 150 °C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
(3) The package thermal impedance is calculated in accordance with JESD 51-7.
Copyright © 2004–2012, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Link(s): SN74AUP1G04