Datasheet

SN74AUP1G00
www.ti.com SCES604H –SEPTEMBER 2004–REVISED APRIL 2012
ABSOLUTE MAXIMUM RATINGS
(1)
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
V
CC
Supply voltage range –0.5 4.6 V
V
I
Input voltage range
(2)
–0.5 4.6 V
V
O
Voltage range applied to any output in the high-impedance or power-off state
(2)
–0.5 4.6 V
V
O
Output voltage range in the high or low state
(2)
–0.5 V
CC
+ 0.5 V
I
IK
Input clamp current V
I
< 0 50 mA
I
OK
Output clamp current V
O
< 0 50 mA
I
O
Continuous output current 20 mA
Continuous current through V
CC
or GND 50 mA
DBV package 206
DCK package 252
DRL package 142
θ
JA
Package thermal impedance
(3)
°C/W
DSF package 300
DRY package 234
YFP/YZP package 132
T
stg
Storage temperature range –65 150 °C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
(3) The package thermal impedance is calculated in accordance with JESD 51-7.
Copyright © 2004–2012, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Link(s): SN74AUP1G00